11.5 Line and neutral terminals in fiexed socket-outlets shall permit the connection, without special preparation, of one, two or three 2.5mm2 solid or stranded or one or two 4 mm2 stranded conductors.
固定式插座的相和中性端子应能连接1，2，或3根2.5mm2实心或绞合线，或1或2根4mm2绞合导线。
如果进行试验时，对相和中性端子对标准列举的5种，都需试验吗？接上3根2.5mm2导线试验，觉得好象不太符合实际情况。
13.4…………The means for producing the contact pressure shall be associated with each socket contact independently…………
这句话是如何理解的？
13.4.1a) ………the voltage drop is mesured between the terminal connecting strap at a point immediately adjacent to the socket contact and the correspondinggg plug pin………
还是没看明白在插套和插销的哪两个部位之间测量电压降。
13.5.1 ………… the socket-outlet is mounted with the engagement face in the vertical plane and with the major axis of the line and neutral pins horizontal…………
哪里算插销或插孔的主轴？如果算插孔或插销轴线的话，可以多个方位啊，比方说接地孔在上或在侧面。
13.16…… Flush or semi-flush mounted socket-outlet plate shall have provision for tow M3.5 fixing screws at centres of 60.3mm on horizontal or vertical centrelines for boxed intended to accommodate 1-gang socket-outlets……
这句话什么意思？？
发表于 2012-2-4 14:08:10
收藏