大家来看看英式插头申请认证的这一要求

ejfgde

BS 1363-1铭牌这一章节规定如果不是用在整机的插头，必须贴含有如下内容的标签，我想请教大家这个标签怎么个形式比较好，即就写如下几段话吗？
还有此标签贴在如何位置？每个出货的插头都要贴这样的标签吗？

7.3 Except where a plug fitted with a flexible cord is supplied direct to a manufacturer for incorporation in
other equipment, the free end of such an assembly shall have a label attached which shall include the
following:
a) the statement: “The flexible cord of this plug must be connected to a piece of equipment before being
plugged into a socket-outlet.”;
b) the maximum rating, in amperes, of the equipment to which it may be fitted (as given in Table 2);
c) the colour code of the cores of the flexible cord as follows:
“IMPORTANT. Wires in the mains lead are coloured in accordance with the following code:
Green/yellow Earth (if any)
Blue Neutral
Brown Live”;
d) if the plug is fitted with a 2-core flexible cord, the following statement:
“This lead must not be used with equipment requiring the protection of an earth continuity conductor.”

gzsl2009

标签贴在尾部
每条都要贴
因为卖到市场，必须教人如何使用

dfcmie

适用于可拆线的BS头