关于钟机(clock radio)碰到的UL问题

dfcmie · 发表于 2012-1-3 12:38:02

各位大哥:

我们有一款钟机.已做货.现给UL新报备一家变压器.UL提出功率大于15W 如下:

The following inform ation is required to complete the investigation.

According to the report of Transformer, Model W41P-A0177 under File E333593,
the power measured was greater than 15 W, it cannot be used on the Radio-
Clock, Model RP5605-A which is employed with the HB Enclosure material. Also,
the thermal fuse employed on Transformer, Model W41P-A0177 was Type RH
125 which is not identical as the report under Transformer. Please double check

请问这个是什么意思.我们该怎么解决?

我们这款钟机标的额定功率是 120V 60Hz 13W

本人是刚接触音视频产品.请各位多指教!谢谢!

wmfgtv · 发表于 2012-1-3 12:38:21

让供应商提供小于15W的变压器就完啦.

如果大于15W,塑胶料用HB就不行了.

后面好象是说,供应商变压器内的保险RH125同原来的做认证时不一样.

dfcmie · 发表于 2012-1-3 12:38:30

谢谢!

1 请教15W是怎么测试来的?

2 变压器的保险丝供应商确实用错了

		自动登录	找回密码
密码			注册