胶水固定是一种可以被接受的固定方式么?

qinglang

在做22章结构的测试的时候,有做50,30N的推拉力测试,如果测试中能被拉出来然后触及到带电体,如果用胶水做固定然后用同样的拉力能够通过测试,请问这样的方式可以接收么?谢谢

ll123456

请说明标准, 不然大家没法回答呀?
22.3 A new sample of the appliance is firmly held so that the retention of the pins is not affected.
The appliance is placed in a heating cabinet for 1 h at a temperature of 70 °C ± 2 °C.
The appliance is then removed from the heating cabinet and a pull force of 50 N is
immediately applied for 1 min to each pin along their longitudinal axes.

若是IEC60335的话, 你是把PIN拉出来了, 还是把整个SOCKET拉出来了?
SOCKET和PIN都是不能用胶水固定的, 因为在SOCKET的零件认证中, 已认证了相应的固定方式, 不包括用胶水.

三笑fvlx

一般是不接受的，只是看自己是否可以取巧了