|
|
本人对；加拿大童床标准的理解，和大家分享！
CANADA SOR/86-962
CANADA Crib and Cradles Regulations---SOR/86-962当中
8.（3）Every stationary or movable side shall, in every adjustment position, have its lowest surface below the upper surface of the mattress support in the lowest position of the mattress support.
8.(4) Every move-away side, when in a position which meets the requirements of subsection (2) , shall have its lowest surface of the move-away side below the upper surface of the mattress support in the lowest position of the mattress support.
最近研究了一下，它和15008.7 gap 的理解是一样的：
8.3 是说所有的具有固定边或可移动边的童床，当床垫支撑装置处在最低位置的时候，在每一个床边的可调节位置，它的固定边或移动边的最下表面都应该在床垫支撑装置的上表面的下边，（为的是防止床垫支撑架比床边低从而和床边之间行成间隔夹伤小孩子）
8.4 也是一样的，重点是说床边的床架之间不能形成gap位。 |
|
发表于 2011-10-17 21:39:43
收藏