跌落测试

davidke

请问有谁知道跌落测试标准

roychen

Please go to my space and consult the "Packaged-Product Drop Test&Impact Velocity Standards".

ming

1,跌落方式：一角三边六面
2跌落高度与重量
重量                                                              高度
1－20.99磅（0.45－9.5KG）                          76.2CM
21-40.99磅（9.55－18.63KG)                        60.9CM
41-60.99磅（18.64－27.72KG)                      45.5CM
61-100磅  （27.73－45.45KG)                       30.5CM

liuqiugen

請問你要的是玩具的跌落測試的標準? 如下:
EN:最嚴格的方向 850mm 跌落5次.
ASTM-F963: 0-18 Months  4.5ft, 10 drops
                 19-36months  3.0ft, 4 drops
                 37-96 months 3.0ft, 4 drops

andyzhao

不知道你要什么的试摔标准,MTL,BV,JCP??

peterdengzb

Rules
1.        No refusal from vendor on the drop test is accepted.
2.        Supplier have to provide the appropriate cartoon in order to protect the goods


Objective
Check the reliability of packing and carton quality.
Ensure the safe transit of products.

Test condition

a) Carton quantity tested:
Sampling size: S-1

b) Test surface:
Flat rigid concrete floor

c) Drop Height for non fragile goods                                Drop test for fragile goods
        Toys, EM, Garden tools …                                                Glass or porcelain

Gross Weight        Drop height                Gross Weight        Drop height
0-10kg        80cm                0-10kg        25 cm
10-30kg        50cm                10-30kg        25 cm
Over 30kg        25cm                Over 30kg        25 cm

d) Drop sequence

1.        Test the most fragile corner, if not known, test the
bottom manufacturer’s joint corner
2.        Test the bottom face

e) Carton should withstand the maximum static pressure in shipping container


Product scope:
These drop test applies to the export carton of all products
Note: Not applicable to packed products on a skid or pallet secured together as a single load.

Inspection Points after Test as Usual Inspection:
1, Package of sales unit
2, Safety, function and appearance of the product

Criteria

No critical defect allowed. The master carton still affords reasonable protection to the sales unit.

Operation guideline

If critical defect emerge after test, the PSI report is failed. Major defect found after drop test should be marked as pending in the PSI report. Minor is acceptable. The defect quantity and ratio should be mentioned in the report.

Mary

一般我们电器的是：ISO2448,不过没有现成的