|
|
8
Package Product Transit Test
For all carton dimensions as usual:
Dimensions refer to the exterior of a carton, measured in inches of Length x Width x Height. in inches (mm or m)
1.1 Length (L) is the longer side of the opening,
1.2 Width (W) is the shorter.
1.3 Height (H) is the length between the openings on either end.
1．。一般的纸箱尺寸:
以纸箱外表面为例, 尺寸以英寸为单位: 长 X 寛 X 高, {mm 或 m},
1.1 长是外围的长边
1.2 宽是外围的短边
1.3高是两端外围之间的距离
2。Measure the weight of carton in pounds (kg)
2．测量纸箱重量, 单位为磅{千克}
3．Vibration Test Period.
3.1 ISTA-1A For Packaged Product 150 lb (68 kg) or less
Test Duration in Minutes =14,200 Vibratory Impacts
.
Revolutions Per Minute (RPM)
3.2 ISTA-1B, 2B For Packaged Product Over 150 lb (68 kg)
Test Duration in Minutes = 11,800 Vibratory Impacts
.
Revolutions Per Minute (RPM)
3.3 (For ISTA) Procedure
Stop the vibration test half way
Turn the packaging 90º (if possible)
If the packaging is too large, turn the packaging 180º
Recalculate the cycle time
3。震动测试时间
3.1 ISTA-1A, 150LB或150LB以下, 其震动时间=14,200次/频率
3.2 ISTA-1B, 150LB以上, 其震动时间=11,800次/频率
3.3 ISTA 测试过程
时间到一半时, 停止震动
如可能,将包装样品转动90度
如包装样品太大, 将包装样品转动180度)
重新计算震动时间
4．Drop test
4.1 FREE-FALL Drop Sequence
ISTA 1A (150 lb or less)
1 corner, 3 edges & 6 faces
(Most Fragile bottom corner, if not known, bottom corner diagonally opposite the manufacturer’s joint)
ISTA 1B (more than 150 lb)
6 faces
4.2 Drop Height
4. 自由落摔测试顺序
4.1 ISTA 1A (150LBS或150LB以下)
1角, 三边, 六面
(底部最脆弱的角, 如无法确定, 就选接缝边的对底角)
ISTA 1B (超过150LBS)
六面
4.2摔箱高度
|
|
发表于 2007-9-27 10:33:00
收藏
是不是还没写完啊？