1.The update standard No. for safety of toys is:_________.
2.For plush toys, on-site tests normally include:________._______.______._______.
3.Inflatable toys should normally bear____________.
4.Please example 3 type of hardness_________._________.__________.
5.The height of "CE" marking should be higher than:__________.
6.The dimensions of small parts cylinder:___________.
7.For the polybag with an opening perimeter greater than 380mm but without punched holes,
the min. thickness of polybag for toys product is:_________.
8.For hang tools, the moisture content of wood handle shall be:___________.
9.For 18/10 chrome no stainless steel, it has_________attraction.("strong"or"slight"or"no")
发表于 2010-3-10 17:43:50
收藏
