验货员论坛

 找回密码
 注册
搜索
查看: 285|回复: 0
打印 上一主题 下一主题

UL859 温升测试问题 求教

[复制链接]
跳转到指定楼层
1#
发表于 2012-1-16 18:05:14 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
UL859 在正常温升时,标准要求:
Appliance is supported as in normal service (NTC side was down)
An electrical heating element intended for application to the hair is to be loaded with a moistened cloth and then operated until the moisture has been evaporated and the heating surface of the unit has attained a temperature of 204°C (400°F). Following a 2 minute period with the unit disconnected, during which it is to be reloaded with another moistened cloth, the heating and evaporating operation is to be conducted a second time. The complete cycle is then to be repeated again. Temperatures are to be measured throughout the test.


我在测试的时候,the heating surface (发热铝板外表面)达不到204度,那我应该如何测试?多久更换一次湿布?

直发器和卷发器都是没有锁扣装置,是否只要测试开夹就可以了?

请教
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|外贸验货员网

GMT+8, 2025-11-13 14:43 , Processed in 0.033715 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表