验货员论坛

 找回密码
 注册
搜索
查看: 224|回复: 6
打印 上一主题 下一主题

请教家电IP测试后的判断

[复制链接]
跳转到指定楼层
1#
发表于 2012-1-6 18:57:40 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
如题
The appliance shall then withstand the electric strength test of 16.3 and inspection shall show
that there is no trace of water on insulation which could result in a reduction of clearances
and creepage distances below the values specified in clause 29.
个人理解是IP测试后样品内部允许有水迹,只要依然满足29和16章的要求就好了。

但是有些人则认为不能有水进入,因为家电IP测试时间只有5分钟,测试的目的是考察是否有水进入内部的趋势。只要有水进入,就算是不影响29章的要求也是不行的。因为考虑到器具使用时间的增长水也很越积越多,最终也会影响29章的要求。

期待大家的观点!
2#
 楼主| 发表于 2012-1-6 18:57:47 | 只看该作者
我说的是防水测试,难道问题表述的不清楚还是这个问题太菜了。居然没有高手现身
3#
发表于 2012-1-6 18:57:54 | 只看该作者
需要case by case 讨论.
一般情况下,如果内部有水都是过不了的, 除了考虑实验的不确定度外,还要看产品是否是手持式的还是portable 或stationary的
4#
 楼主| 发表于 2012-1-6 18:58:01 | 只看该作者
The appliance shall then withstand the electric strength test of 16.3 and inspection shall show
that there is no trace of water on insulation which could result in a reduction of clearances
and creepage distances below the values specified in clause 29.
标准好像明确说允许有水,只要不影响29的要求。
如果内部有水都是过不了的话标准就可以直接要求The appliance shall then withstand the electric strength test of 16.3 and inspection shall show that there is no trace of water就好了,干吗还要加上后面这个要求呢which could result in a reduction of clearances
and creepage distances below the values specified in clause 29.?同时标准上也没有说明对portable 或stationary的要求不同呀?请指教
5#
发表于 2012-1-6 18:58:09 | 只看该作者
如果说是有水进入器具,并且是已经接近于带电部件,虽然实验结束后并没有影响到底29章的爬电距离,但是从安全隐患角度,应该也要判其不合格。
6#
发表于 2012-1-6 18:58:16 | 只看该作者
考虑到日积月累的效果
要求不能有水迹
存在于带电部件
7#
发表于 2012-1-6 18:58:29 | 只看该作者
标准的目的是水进入内部后不会产生安全隐患。
判定关键是“趋势”,如果结构上不会形成影响29章的水迹,则可判OK,否则,虽然试验规定时间后没问题(标准要求的电气强度试验,安全距离等pass),但保险起见,很多人也会判NG的。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|外贸验货员网

GMT+8, 2025-11-15 00:28 , Processed in 0.086432 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表