|
|
BS EN60335-1:2002 cl15.1
For IPX4 appliances, the horizontal centre line of the appliance is aligned with the pivot axis
of the oscillating tube. However, for appliances normally used on the floor or table, the
movement is limited to two times 90° from the vertical for a period of 5 min, the support being
placed at the level of the pivot axis of the oscillating tube.
If the instructions for wall-mounted appliances state that the appliance is to be placed close to
the floor level and specifies a distance, a board is placed under the appliance at that
distance. The dimensions of the board are 15 cm more than the horizontal projection of the
appliance.
Appliances normally fixed to a ceiling are mounted underneath a horizontal unperforated
support that is constructed to prevent water spraying onto its top surface. The pivot axis of the
oscillating tube is located at the same level as the underside of the support and aligned
centrally with the appliance. The spray is directed upwards.
For IPX4 appliances, the movement of the tube is limited to two times 90º from the vertical for
a period of 5 min.
标准写的很清楚角度应该是左右各90度。那个正负180是指的一个周期 |
|