|
|
APQP-English
ADVANCED PRODUCT QUALITY PLANNING (APQP) AND CONTROL PLAN
Reference Manual
This Reference Manual and Reporting Format were developed by the Advanced Product
Quality Planning (APQP) and the Control Plan teams that were sanctioned by Chrysler, Ford,
General Motors Supplier Quality Requirements Task Force.
The Task Force charter is to standardize the reference manuals, procedures, reporting formats,
and technical nomenclature used by Chrysler, Ford, and General Motors in their respective
supplier quality systems. Accordingly, this manual and format, approved and endorsed by
Chrysler, Ford and General Motors, should be used by suppliers implementing APQP
techniques into their design/manufacturing processes.
In the past, Chrysler, Ford, and General Motors each had their own guidelines and formats for
ensuring supplier APQP compliance. Differences between these guidelines and formats
resulted in additional demands on supplier resources. To improve upon this situation,
Chrysler, Ford and General Motors agreed to develop and distribute this Manual. The work
group responsible for this Manual was led by Mike Mazur of Ford Motor Company.
This manual provides general guidelines for preparing plans and checklists for ensuring that
Advanced Product Quality Planning is in actuality carried out at the supplier. It does not give
specific instructions on how to arrive at each APQP or Control Plan entry, a task best left to
each component review team.
While these guidelines are intended to cover all situations normally occurring either in the
early planning, design phase, or process analysis, there will be questions that arise. These
questions should be directed to your customer’s Supplier Quality activity. If you are uncertain
as to how to contact the appropriate activity, contact your buyer in your customer’s Purchasing
office.
The Task Force gratefully acknowledges: the leadership and commitment of Vice Presidents
Thomas T. Stallkamp at Chrysler, Norman F. Ehlers at Ford, and G. Richard Wagoner, Jr. of
General Motors; the assistance of the AIAG in the development, production, and distribution
of this manual; and the guidance of Task Force Principals Russell Jacobs (Chrysler), Radley
Smith (Ford), and Dan Reid (General Motors).
This procedure is copyrighted by Chrysler, Ford and General Motors, all rights reserved, 1994.
Additional copies can be ordered from AIAG 810-358-3003. Suppliers of the Automotive
Industry have permission to copy any forms and/or checklists. |
评分
-
查看全部评分
|
发表于 2007-7-13 16:53:03
收藏
楼主
