验货员论坛

 找回密码
 注册
搜索
查看: 240|回复: 1
打印 上一主题 下一主题

Subject 8750 测试

[复制链接]
跳转到指定楼层
1#
发表于 2012-1-21 01:53:59 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
请问 8750中的耐电压测试 以下这段式什麽意思?
8.4.2 The dielectric withstand test equipment shall employ a transformer of 500-VA or larger capacity and
have a variable output voltage that is essentially sinusoidal or continuous direct current. The applied
potential is to be increased from zero at a substantially uniform rate until the required test level is reached,
and is to be held at that level for 1 minute.
Exception: A 500-VA or larger capacity transformer is not required if the transformer is provided with a
voltmeter to measure directly the applied output potential.

感谢!!!
2#
发表于 2012-1-21 01:54:05 | 只看该作者
这段是对耐压测试的仪器要求和方法,大致意思如下:
高压仪不仅要有500-VA或者更大的的变压器,而且要有可调的输出电压,使得可以输出正弦曲线或者恒定电流。测试电压应该按照一定的速率从零开始一直调到所需的电压,并将测试电压保持1分钟。
例外:如果变压器有电压表可以直接测出输出的测试电压,那么变压器就不需要500-VA。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|外贸验货员网

GMT+8, 2025-9-19 06:45 , Processed in 0.035722 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表