求助：BS1363-2 中的第13.11章节测试是怎么做的?

622

BS1363-2 中的第13.11章节测试是怎么做的。给一个3F的力怎么判定结果是否合格？假定现在我把开关的触点焊接在一起，让它处于闭合状态，再给操作件施加3F的力，但操作件能停留在OFF的位置，那这个产品是不是判定为不合格呢？有人能把具体的操作方法说一下吗，请赐教，非常感谢！

cgeorge

Your method for doing the test is correct. If the actuating member remained at rest in the OFF position, it should be classified as "Fail". The purpose of this test is to make sure that no wrong indication ("On" state become "Off" but the socket is still in "On" state) will be given to end user.