验货员论坛

 找回密码
 注册
搜索
查看: 459|回复: 8
打印 上一主题 下一主题

主题: Minimum stretch for Knit garments

[复制链接]
跳转到指定楼层
1#
发表于 2011-10-3 13:16:57 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
For a while now I have been thinking we should fall in line with the larger companies and do a 30% stretch on knit garments.

I have had the OK from our main clients so:

1. We will now do a 30% minimum stretch on knit garments - no longer a 10% stretch.

2. This is on a trial basis only. We will wait to see if we get any adverse reaction from factories or suppliers.

3. Please advise all our inspectors - emphasising that it is a gradual stretch not a pull.
那位高人帮忙看看翻译一下,谢谢!!
2#
发表于 2011-10-3 13:17:03 | 只看该作者
试试看:
For a while now I have been thinking we should fall in line with the larger companies and do a 30% stretch on knit garments. 到现在这段时间我一直在考虑关于衣服的最小领拉力问题,在我们与大公司合作中,中期检查是不成功的,对领拉力的检查至少要抽查30%

I have had the OK from our main clients so:
如果我们主要客户同意的话,将实行以下措施:

1. We will now do a 30% minimum stretch on knit garments - no longer a 10% stretch.
我们针对针织品领拉力问题将至少抽查30%,而不再是以前的10%

2. This is on a trial basis only. We will wait to see if we get any adverse reaction from factories or suppliers.这是一个最基本的试验方法,我们将看工厂的反应再作调整

3. Please advise all our inspectors - emphasising that it is a gradual stretch not a pull.
同时建议我们的查货员检查方法,强调拉领拉力是逐步用力而不是突然用力。
3#
 楼主| 发表于 2011-10-3 13:17:16 | 只看该作者
谢谢了!!!Ylc
4#
发表于 2011-10-3 13:17:46 | 只看该作者
那里有最小领拉力???
5#
发表于 2011-10-3 13:17:52 | 只看该作者
amberman, 你是对的,里面是看不到说领拉力的问题,是我在翻译时不知不觉地想到了过头的问题了,文章只是对针织衣服要拉,没有讲到拉领,所以到地怎样拉,拉什么地方还要更多了解客人所指的了,希望KEVIN提供更多一点情景。
6#
发表于 2011-10-3 13:17:58 | 只看该作者
哦,知道了. 不过你能不能说说最小领拉力的细节, 对这个有点糊涂
谢谢!
7#
发表于 2011-10-3 13:18:05 | 只看该作者
凡是从头上穿进去的衣服都要能够过头,如果连头都过不了,衣服就穿不进去,所以那件衣服就根本没有用,为了保证衣服能过得了头,一般客人规定领的最小拉力要能拉到指定的大小,一般来说,童装最少能拉28CM,女装32CM,男装33CM
8#
发表于 2011-10-3 13:18:12 | 只看该作者
知道了,,,,,非常感谢!
9#
 楼主| 发表于 2011-10-3 13:18:42 | 只看该作者
呵呵~~~我想是领拉力问题,因为那是我们老大给我们发的邮件,我也是看得一知半解。我觉得ylc这位仁兄答解很有道理。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|外贸验货员网

GMT+8, 2025-7-13 05:18 , Processed in 0.113521 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表