TEST RESULT: N/A □ PASS □ FAIL □ WARNINGS&INSTRUCTIONS Y □ N □
DROP TEST/HEIGHT N/A □ PASS □ FAIL □ BRAND/LOGO Y □ N □
UL/ETL/APPROVAL N/A □ PASS □ FAIL □ UL/ETL/CUL/CSA MARKING Y □ N □
VISUAL CORRECT ACTION REQUIRED YES□ NO□ WAS CORRECTIVE ACTION TAKEN? RN/CA/ OF ORIGIN. Y □ N □
SPECIFIC TESTS CONDUCTED FACTORY: N/A □ PASS □ FAIL □ STYLE/ DEPT/ ID Y □ N □
N/A □ PASS □ FAIL □ BUING POLICY DISPLAYED INFACTORY Y □ N □
DEFECT OLASSIFICATIONS
CHECX POINTS CHECX POINTS
1.MATERIAL COMMPOMENTS MAJOR MINOR 6. SAFETY CRT MAJOR MINOR
A Construction not as sample A Hi-drop test fail/ourent leakage
B Shade/color not as sample B Wrong construction/ wrong wiring
C Distorted C Gas leakage
D Chipped/ cracked D Power card not tied properly
E Excessive damp on vocden product(8%-14%) E Sharp points/sharp or rough edges
F Other F Other
TOTAL TOTAL
2.FUNCTIONAL 7. pack / Label
A Excessive vitretion / nolse A Carton marks incorrect.
B Runs improparly/ wheeling B Carton poor quality.
C Unstable RPM(+/-10%) C Carton size out of
D Overheating D Content incorrect/incorrcet assortment.
E Other E Loose packing / Protection .
F TOTAL F Hangtags/picetags mis-sized.mispaced.missing
3. APPEARANCE G label/sticker-missing incorrect damagedinsecuse
A Sol/oil/glue marks/slains H Polybag wrong size
B Color mis-match/ shaed I Polybag . Information on bag incorrect
C Poor plating / painting / sanding J Quantity incorrect
D Rust/ mildew/ corrosion K Fold incorrect
E Other L Gift box color/size/ quantity incorrect
TOTAL M Barcode label incorrect
4. Dimension&size comparison specification N Inner mark and marking/barcode label incorrect
A Out of specification O Ctn size
B Measurement inconsistent TOTAL
C Other 8. Other
TOTAL A
5. Assembly B
A Wobble/voids/ poor joining C
B Missing/ loose/ broken/ darts D
C Improper spot-weld connection TOTAL
D Incorrect instruction sheet GRAND TOTAL DEFECTS:
E Other
TOTAL
Unit Inspectioned pcs carton number AQL Level Major: 2.5 ACC Rej
N/ A AQL Level Minor: 4 ACC Rej
Level: Normal □ Tighten □ Reduted □
Preparation% Pre-essarmbling% Finishing % completed% carton packgaed% Eslinsted Conplotion Date
comments:
vendor Factory signature:
inspector's signature: QA Manager's signature
(s)correct or with tolerance (X) Incorrect or failed
(N) Not available for inspection and need to follow up by next inspection (O) Not applicable作者: yyfbz 时间: 2007-6-27 12:13
呵呵，有点乱，用文档格式发上来要好点！作者: joanallen 时间: 2007-7-3 13:42 标题: 回复 #4 qiugen 的帖子 qiugen:你好！能否把验货报告转发给我：chinaarts_joan@hotmail.com
谢谢。作者: adsl2008 时间: 2007-7-3 13:48
我这里有一份英文的英文验货报告,不知道能否帮助你. http://bbs.wtoqc.net/forum.php?mod=viewthread&tid=894作者: ddhh 时间: 2007-7-23 11:49 作者: broodtrue 时间: 2007-7-23 14:02
我觉得在外贸公司的话还是自己按照实际情况写一个适合自己公司的报告比较好
当然可以参考大公司或公正行的报告作者: 爱拼才会嬴 时间: 2007-7-27 12:23
我赞同楼上人的说法.有些表格只做参考.做自己公司的表格跟好。作者: maggie1688 时间: 2007-7-27 12:37
