标题: 如何做钢化玻璃的爆裂测试？ [打印本页] 作者: fortune1 时间: 2012-11-8 10:18 标题: 如何做钢化玻璃的爆裂测试？ 请教：如何做钢化玻璃的爆裂测试？急急！谢谢！作者: snakeahui 时间: 2012-11-8 11:12
路过，等高手来解答作者: fortune1 时间: 2012-11-8 11:21
急啊作者: snakeahui 时间: 2012-11-8 11:38
我一个朋友告诉我 砸玻璃边缘的一个角；破碎后是小的颗粒状作者: onedaymore 时间: 2012-11-8 13:26 标题: 鞋类专业QC群125145883，不是别进 找一块，摔一下，像颗粒状分裂破碎。否则不是！！作者: fortune1 时间: 2012-11-8 14:03
谢谢作者: charles607 时间: 2012-11-8 14:11
就是砸作者: 顺德验货 时间: 2012-11-8 14:41
Purpose:
To determine whether tempered glass or not
Procedure:
Use clear gummed tape to prevent glass fragment splashing.
Freely drop the tempered glass from enough high level. After the tempered glass was broken, check the small glass piece, it could not be injured the user
Acceptance Criteria:
The maximum length of small glass piece is 75 mm
The small glass piece should not less than 40 within 50*50mm
If any fault was found during testing, please state on report as special attention and take legible photo.作者: fortune1 时间: 2012-11-8 16:39 标题: 回复 8# 顺德验货 的帖子 many thanks作者: Jack-Yang 时间: 2013-8-2 21:31 :) :) :) :)
