□ Urgent Production Unit: Inspection Date: Date Code: Ref:
Production □ Sample □ Pilot Run □ Re-production □ Stock □ Reject □ Re-work
Customer: Model No.: PS:
PO:
PO Q’ty: Production Q’ty: Production Date:
Sample Q’ty: Qualified Q’ty: Disqualified Q’ty CRI : pc
Inspection Adjustment □ Normal □ Increase □ Decrease MAJ: pc
AQL CRI：0 MAJ：0.40 MIN：0.65 MIN: pc
ACC/REJ / / / Approved by Zhang Ju hong
Inspection Result ass □ Reject Inspector Hu Ming Hu Ming
Inspection Standard □ MIL—STD—105E □ LEVELⅡ Self Standard Full Check
Inspection Item Inspection Method and Standard Sample Q’ty Result
Packaging According to specification and packaging instruction. AC CRI MAJ MIN
Specification According to production drawing version B.
Electrical No open/short circuit, insulation resistance value 10MΩ
above, conductor resistant value 3Ω below, high pressure
test DC/500V.
Appearance According to production inspection instruction and confirmed sample.
Bending Test
(Cable) Weight: 500g, Left/Right 60°, 30 times/minute, 30,000 times or above. Set 30,010 times.
Pulling Test Nil
Non-Toxic Test Compliant to ROHS
Others SR Pulling Test: Weight 16 kg for 10 seconds
Test on stability of logo and silk screen on J2: use tape
to tape and pull 4 times and rub with 95% alcohol 50 times
Compliant to IEC60529 IPX6 Water Resistance Test
DIN head Pulling Test: Weight 10 kg for 10 seconds
Pulling test:2.0kg/f for 26#
Dimension Record
Testing Part Dimension Standard
（MM） NO.1 NO.2 NO.3 NO.4 NO.5 NO.6 NO.7 NO.8 Result
OK NG
Curve Length
Curve OD
我也要yifeng
没找着呀。
ass □ Reject Inspector Hu Ming Hu Ming