标题: 8字尾正常操作在VDE测试失败，求改善 [打印本页] 作者: q529891012 时间: 2012-2-8 12:49 标题: 8字尾正常操作在VDE测试失败，求改善 不合格说明如下，请各位吹吹如何改善,内架和端子都为GEM认证专用的：
20 Normal operation
After the test (2000 strokes with rated current and 6000 strokes without current flowing) the electric
strength test as specified in clause 15.3, reduced to 1500 V has not been fulfilled.
Flashovers between the contact tubes and a metal foil at the engagement face of the connector have
been occurred at 800 V, 1200 V and 1500 V.
Flashover between the contact tubes occurred at 1450 V.
在1450V时连接铜管产生闪烁。作者: 622 时间: 2012-2-8 12:49
铜管材质有问题，弹性不好。作者: 622 时间: 2012-2-8 12:49
有没有高手还有不同看法？作者: q529891012 时间: 2012-2-8 12:50
这么多天了没有高手出来呀，自己发表，呵呵
我请教了高手，可能是两个原因，一是材料，二是模具（制作工艺）作者: 622 时间: 2012-2-8 12:50
成型压力和内架也有关系，关键要看内架是不是已经变形。