验货员论坛

标题: UL507电扇标准中关于电线要求更新 [打印本页]

作者: ejfgde    时间: 2012-2-4 15:14
标题: UL507电扇标准中关于电线要求更新
所有根据ANSI/UL 507申请 ETL Mark 的产品在 2010年9月27号之前, 必须符合以下於2007年9月27号所发布的新生效或是修正的标准条文. 新生效条文摘要如下:

14.1.1A 针对Table 14.1内,第一列与第二列所描述的电源线,必须符合Section 51B~51E的能力测试。
51B supply cord Abrasion
51C supply cord pinching -mandrel
51D supply cord crushing -mandrel
51E supply cord flexing

要求相当的高,在客户那里看到测试过程,感觉要通过这个测试,电线胶料配方要作相当大的改变才行
作者: ejfgde    时间: 2012-2-4 15:14
UL 1278电暖器标准仍有相同的要求,所以做电线的朋友们一定要早作准备啊


Adds testing for power supply cords used with an appliance of the types described in Row 1 of Table 16.1. Supply Cord Abrasion (5,000 cycles), Supply Cord Pinching – Mandrel (500 pounds (2,000 N)), Supply Cord Crushing – Mandrel (200 pounds (890 N)), and Supply Cord Flexing (3,100 cycles) tests are included. Five cord specimens must be subject to the tests, except six samples of a power-supply cord for the Supply Cord Flexing Test shall be submitted. Each power supply cord type, produced by each vendor, shall be tested.




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2