验货员论坛

标题: 取暖器(灯暖/风暖/换气)浴霸抽样检验标准 [打印本页]

作者: 依然好好    时间: 2007-9-13 14:04
标题: 取暖器(灯暖/风暖/换气)浴霸抽样检验标准
我自己刚刚搞好。不知道有没有什么问题,请大家看后点建议。
成品检验指导书.doc (65.5 KB, 下载次数: 228)
作者: reiko    时间: 2007-9-17 13:55
我不能下载呀,怎么办呢
作者: franklee    时间: 2007-9-17 15:44
标题: 回复 #2 reiko 的帖子
不错的贴,多发点好文章,给大家分享,钱就来了./
作者: aabbcc    时间: 2007-11-13 19:41
标题: ddddddd
thank you very much.......
作者: ddhh    时间: 2007-11-13 21:39
还行的资料
作者: GPW888    时间: 2007-12-5 13:43
好哦
作者: joyfulwenc    时间: 2008-1-28 16:10
很好     
支持一下
作者: reiko2008    时间: 2008-3-24 21:07
请问楼主,还有没有其它有关取暖器的好资料呀?
作者: ericpang    时间: 2008-4-4 06:48
小伙子,跌落测试方法不对
作者: ericpang    时间: 2008-4-4 16:38
跌落测试的高度cm(in) 76 (30)/61(24)/46(18)/31(12)/20(8)
测试的方法,一角三边六面

Drop or impact the packaged product according to the following sequence:
a.        test the most fragile face-3 corner , if not known, test the 2-3-5 corner ;
b.        the shortest edge radiating from the corner tested;
c.        the next longest edge from the corner tested;
d.        the longest edge radiating from the corner tested;
e.        flat on one of the smallest faces;
f.        flat on the opposite faces;
g.        flat on one of the medium faces;
h.        flat on the opposite medium face;
i.        flat on one of the largest faces
j.        flat on the opposite large face
作者: Tomwong    时间: 2008-5-9 13:20
Thanks for sharing.
作者: wwnw_007    时间: 2008-5-9 14:53
家用电器成品检验规范可以借签的哟!
作者: melodyhata200    时间: 2008-5-11 14:04
支持一下..多谢.
作者: LYZJACK88    时间: 2008-5-11 15:32
Supporting!
作者: DLW    时间: 2008-5-24 16:15
很好.支持一下
作者: pengxiaomei    时间: 2008-6-6 00:11
谢谢楼主!找了这个资料好久了
作者: xdygis    时间: 2008-6-6 09:47
很详细,支持一下。。。。。。。。。
作者: candy-2007    时间: 2008-7-3 13:20
标题: ...

谢谢分享~~~
作者: 无痕    时间: 2008-8-10 15:06
楼主提供的资料真是不错,辛苦了
作者: georrs    时间: 2008-8-20 19:25
跌落测试怎么是8次
作者: ltjzq19    时间: 2008-8-21 10:45
先顶下..........

我觉得跌落标准不对.我支持10楼的跌落标准
作者: adsl2008    时间: 2008-8-22 14:23
太简单了点
作者: andyzhao    时间: 2008-8-22 14:42
thank you very much !
作者: lengjxh    时间: 2008-8-29 18:41
好阿,多谢了
作者: 莲池明月    时间: 2008-9-16 10:31
收藏了  谢谢
作者: whiteiron00    时间: 2008-9-21 09:46
取暖器有几种类型:油汀,卤式灯,灯丝等吧,楼主还没有搞清楚类型吧
作者: romehu208    时间: 2010-6-3 11:19
仁兄权限不够给发一份急用哦

谢谢
作者: romehu208    时间: 2010-6-7 09:56
取暖器(灯暖/风暖/换气)浴霸抽样检验标准
作者: MS168    时间: 2010-12-25 03:25
都对。。。。。。
作者: Phenix    时间: 2010-12-25 11:42
不错的贴,多发点好文章,给大家分享
作者: knowingme    时间: 2011-8-31 23:07
标题: 咋回事
咋下不了呢
作者: lucky-str    时间: 2011-9-1 19:48
不错的贴,多发点好文章,给大家分享,钱就来了
作者: MS168    时间: 2011-9-3 07:09
支持。、。。。。。。。。。




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2