One sample of Model _______________ was used for this test.
With no portion of the cord withdrawn, the sample was placed on four, single plies of cheesecloth. The cord reel was then wired to draw an overload current of _______ A, at rated voltage, on all conductors which normally carry current. The overload current was equal to 110 percent of the maximum current as limited by the [branch circuit breaker] [overcurrent protection device]. The [branch circuit breaker] [overcurrent protection device] was bypassed for this test.
[ ] The metal enclosure was grounded through a 3 A fuse.
Four, additional, single plies of cheesecloth were then used to cover the cord reel. The test was then allowed to continue for 7 h, or until the cheesecloth ignited [or the 3 A ground fuse opened].