验货员论坛

标题: III类灯具插头 [打印本页]

作者: swk_sun    时间: 2012-1-27 16:37
标题: III类灯具插头
请教,一般插头是需要有认证,III类灯具的插头有何要求???不可使用能插入通用插座的插头?有这一条要求吗?
作者: ejfgde    时间: 2012-1-27 16:37
不可使用能插入通用插座的插头。
作者: swk_sun    时间: 2012-1-27 16:38
原文 :
不可使用能插入通用插座的插头。
那只能使用特殊插头吗???!!!
作者: yang1933    时间: 2012-1-27 16:38
要是有图可以参考下就perfect了。。。
作者: ksxtye    时间: 2012-1-27 16:38
5.2.14 A class III luminaire shall not be provided with a plug which permits connection with a socket outlet according to IEC 60083.
Plugs and socket-outlets for class III luminaires, where a safety isolating transformer is
delivered with the luminaire having rated current ≤3 A and rated voltage ≤25 V a.c. or 60 V d.c.
and power not exceeding 72 W, are allowed to comply only with the following requirements:
– plugs shall not be able to enter socket-outlets of other voltage systems (according to
IEC 60083);
– sockets-outlets shall not admit plugs of other voltage systems;
– socket-outlets shall not have the protective earth contact.
NOTE 2 For this particular plug and socket-outlet system, the ball pressure test given in Section 13

可以参考IEC60598-1 clause 5.2.14.




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2