验货员论坛

标题: 温度测试 [打印本页]

作者: 0813    时间: 2012-1-18 18:24
标题: 温度测试
请问各位:灯具Ta标为40度,那温度测试在40度的环境测试,还是在25度环境测试,然后将测试值修正到40度,如果在40度环境中测试,那灯具放在什么样的温度箱做呢,带鼓风还是不带鼓风。
作者: jqtimo    时间: 2012-1-18 18:24
If, however, a lamp has temperature-sensitive electrical characteristics (e.g. a fluorescent
lamp), or if the ta rating of the luminaire exceeds 30 °C, the ambient temperature within the
draught-proof enclosure shall be within 5 °C of the ta rating and should preferably be the
same as the ta rating.

按标准的话 我觉得应该以40度来做 误差5度以内 选不鼓风,应为实验本身要求在防风罩内做
作者: 0813    时间: 2012-1-18 18:24
你说的是UL1598标准吧
我说的是IEC60598标准中是怎么规定的
如果在防风罩中进行,那怎么样提供40度环境了
如果在温度箱中,那那种的箱子不鼓风呀,我们这边的 箱子都有鼓风哦
作者: 0813    时间: 2012-1-18 18:24
怎么没人回复哦
作者: 万能科技    时间: 2012-1-18 18:24
学习中,




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2