标题: 求教AS/NZS 60335.2.30: 2009 clause 30.2.1 [打印本页] 作者: swk_sun 时间: 2012-1-9 22:14 标题: 求教AS/NZS 60335.2.30: 2009 clause 30.2.1 寻求高人指点：
澳洲认证，产品：Fan heater
澳洲针对Fan heater（室内加热器）最新2009版标准AS/NZS 60335.2.30: 2009 clause 30.2.1章规定：
30.2.1 Modification:
The glow-wire test is carried out on enclosures at a temperature of 650 °C.
Addition:
For fan heaters having an enclosure of substantially non-metallic material, the non-metallic
material
– in the enclosure, in fan blades and in all structural elements within the enclosure;
– in components such as thermostats, thermal cut-outs, switches and the like that are
mounted within a distance of 25 mm from a heating element;are subjected to the following tests.
Such parts shall withstand the glow-wire test of IEC 60695-2-11 without ignition, the test
being carried out with a severity of 850 °C. However, the glow-wire test is not carried out on
parts of material classified as having a glow-wire ignition temperature according to
IEC 60695-2-13 of at least 875 °C.
对于这句话：Such parts shall withstand the glow-wire test of IEC 60695-2-11 without ignition
without ignition 怎么理解呢？作者: feazhp 时间: 2012-1-9 22:14
Such parts shall withstand the glow-wire test of IEC 60695-2-11 without ignition
这些部件应能通过IEC60695-2-11灼热丝测试不燃烧，不复杂吧？作者: 网络营销bc 时间: 2012-1-9 22:15
就是通过灼热丝测试后，这些部件没有被点燃作者: q529891012 时间: 2012-1-9 22:15
原文 :
Such parts shall withstand the glow-wire test of IEC 60695-2-11 without ignition
这些部件应能通过IEC60695-2-11灼热丝测试不燃烧，不复杂吧？