验货员论坛

标题: CB说明书要求 [打印本页]

作者: magebao    时间: 2012-1-3 15:26
标题: CB说明书要求
请教各位大侠,在CB认证中对说明书有什么要求?
因为我们的客人要求修改说明书尺寸,我担心减少尺寸之后字体看不清,这个有要求吗?
作者: ehfhhe    时间: 2012-1-3 15:26
Sufficient information shall be provided to the USER concerning any condition necessary to
ensure that, when used as prescribed by the manufacturer, the equipment is unlikely
to present a hazard within the meaning of this standard.

IEC标准里没提到对字体的要求。但UL标准里对字体的要求,见下:
²IMPORTANT SAFETY INSTRUCTIONS² and ²SAVE THESE INSTRUCTIONS²–
shall be entirely in upper case letters not less than 3/16 in (4.8 mm) high or emphasized to distinguish
them from the rest of the text. Upper case letters in the instructions shall not be less than 5/64 in (2.0 mm)
high, and lower case letters shall not be less than 1/16 in (1.6 mm) high.
作者: magebao    时间: 2012-1-3 15:27
原文 :
Sufficient information shall be provided to the USER concerning any condition necessary to
ensure that, when used as prescribed by the manufacturer, the equipment is unlikely
to present a hazard within the meaning of this standard.

IEC标准里没提到对字体的要求。但UL标准里对字体的要求,见下:
.......

非常感谢你!




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2