标题: 带有器具输入插座的产品属于X连接吗？ [打印本页] 作者: d60102224 时间: 2011-12-10 15:47 标题: 带有器具输入插座的产品属于X连接吗？ 一般的电饭锅所用的器具输入插座与分离式电源线，是属于X连接吗？之前经请教高手，被告知这属于Pin连接，不属于X连接。
可是60335中：
25.5 Supply cords shall be assembled to the appliance by one of the following methods:
– type X attachment;
– type Y attachment;
– type Z attachment, if allowed in the relevant part 2.
Type X attachments, other than those having a specially prepared cord, shall not be used for
flat twin tinsel cords.
Compliance is checked by inspection.
这段话是否意味着器具只能用这三种连接方式中的一种？如果是又如何界定普通电饭锅的电源连接方式？请高人不吝告知，小弟不胜感激！作者: orlzvs 时间: 2011-12-10 15:48
type X attachment作者: sd929898 时间: 2011-12-10 15:49
先看25.1:
25.1 Appliances, other than those intended to be permanently connected to fixed wiring,
shall be provided with one of the following means for connection to the supply mains:
– supply cord fitted with a plug;
– an appliance inlet having at least the same degree of protection against moisture as
required for the appliance;
– pins for insertion into socket-outlets
首先是电源的连接,你的器具采用的是“an appliance inlet ”连接方式，“Supply cords ”并不和器具直接连接，所以25.5并不适用。
注意电源连接和电源线连接的区别。先确定电源连接的方式，再考虑电源线。作者: 04211 时间: 2011-12-10 15:49
用户被禁言,该主题自动屏蔽!作者: 志纤陶 时间: 2011-12-10 15:50
不属于X型连接作者: ejfgde 时间: 2011-12-10 15:51
不可拆线器具输入插座是什么?有这个的存在吗?还是第一次听说,学习下