验货员论坛

标题: 风扇2-80-19.7 [打印本页]

作者: gudongman    时间: 2011-12-10 15:11
标题: 风扇2-80-19.7
在风扇特殊要求上,19.7如下:
Separate controls are mounted on a dull back-painted plywood board. Approximately 50% of the area of each ventilating opening is blocked. The temperature of windings shall not exceed the values specified in Table 8 and the temperature rise of the board shall not exceed
-50K, for appliances with T marking;
-60K, for other appliances.

这里需要对风扇的通风口进行遮盖50%后测试.请问这条测试是针对什么样的条件来做的. 针对单独控制器? 出于什么目的需做此测试?
作者: 网络营销bc    时间: 2011-12-10 15:12
这个试验主要出现在吊扇或者壁扇上的调速器上的(用绕组调速,非电容调速那种),因为调速器紧贴墙面,调速器背面或侧面散热孔可能被遮盖,散热条件可能会比较恶劣,所以要同时考核调速器绕组和安装板。




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2