附件為UL細則的第一頁, 要學會看細則, 還真得先把這一頁看懂了.
1. Authorizaton Page:
俗稱授權頁, 一個UL檔案可能只有一個申請者(Applicant), 有时还有不同的列名者(Listee), 可以有很多個生產工廠(Manufacturer, 一般会列在Addendum to Autorization Page), 每增加一個生產工廠, 就會修改一次授權頁, 這是工廠是否有取得ul授權的象徵. 在這裡你也會找到該檔案授權類型是L還是R等. 如果每個Vol授權的工廠不一樣, 那每個Vol都會有一個授權頁.
有个概念, 什么是L类检验什么是R类检验? L 及 R 类 (Type L & Type R) 的跟踪检验服务
在首次生产检验 (IPI) 之后，被授权的UL工厂检验人员将会定期前往生产工厂进行随机检验，此种检验称为L及R类 (Type L & Type R) 的跟踪检验服务。
è L类的跟踪检验服务 – 根据制造商在产品或系统上使用的UL认证标志的数量，进行工厂的跟踪检验服务。
è R类的跟踪检验服务 –每季定期对产品或系统进行工厂的跟踪检验服务。
在這裡你還能找到該產品的產品類別及控製號
Authorizes the appropriate type of Follow-Up Service(L or R).Contains the names and addresses of the Applicant, Listee (Recognized or Classified Company) and Manufacturer and the corporate Identifier number assigned by UL to each entity, as well as the name of the UL product cateory title.
FOLLOW-UP SERVICE PROCEDURE
(TYPE R) --認證等級 R代表Recognized, L表示Listed.
??????? APPLIANCES --產品類別
(XXXX,XXXX) --控製號
Manufacturer: name of manufacturer
(0000001-001) address of manufacturer
Applicant: name of Applicant
(0000002-001)
Listee: SAME AS APPLICANT
(100001-002)
This Procedure authorizes the above manufacturer to use the marking specified by Underwriters Laboratories Inc. only on products covered by this Procedure,in accordance with the applicable Follow-Up Service Agreement.
The prescribed Mark or Marking shall be used only at the above manufacturing location on such products which comply with this Procedure and any other applicable requirements.
The Procedure contains information for the use of the above named Manufacturer and representatives of Underwriters Laboratories Inc. and is not to be used for any other purpose. It is lent to the Manufacturer with the understanding that it is not to be copied, either wholly or in part, and that it will be returned to Underwriters Laboratories Inc. upon request.
This PROCEDURE, and any subsequent revisions, is the property of UNDERWRITERS LABORATORIES INC. and is not transferable.
UNDERWRITERS LABORATORIES INC.
Name of the officer
Chief Operating Officer
2. Addendum to Autorization Page
这是授权页的附录, 用来列出更多的授权工厂, 每一个授权工厂出货前必须要进行一次IPI(initial production inspection),你可以在这里找到每家工厂的信息/地址/授权号.
Lists the names, addresses and UL identifier numbers of all manufacturing locations when multiple locations exist.
3. Listing Mark Data (LMD) Page, Classification Mark Data (CMD) Page or Recognized Component Marking Data (RCMD) Page.
这是列名/分级/认可等R类产品, 如何在产品上正确标示UL标志的方法介绍. 列名和分级产品还要求在UL标志下标注产品控制号. 这里你可以找到如何正确标示UL标志, 标志大小要求, 使用方法和程序. 如:
UL.JPG
Used only for products covered under Type R services as shown on the Authorization Page. Use to determine the correct Listing/Classfication/Recognized Component Mark(ing). For Listed and Classified categories the assigned control number is included, which is part of the required marking. Also includes additional information regarding minimum size, application, procurement and any other optional markings, as well as the appropriate UL Mark.
4. Multiple Listing (ML) Correlation Sheet
多重列名清单
Correlates product model numbers between those products made by a Manufacturer for the Basic Applicant and those supplied to another company, the Multiple Listee.
5. Index
Catalogs the contents of the Procedure by some logical means, i.e. Section Number or Issue Date.
6. Appendices (App.)
Contains instructions for the Manufacturer and UL Representative concerning specific responsibilities and required periodic test. May also outline tests to be conducted on samples to be forwarded to UL's facilities.
Standardized Appendix Pages are the same for all manufacturers within a particular product category.
7. Follow-Up Inspection Instructions (FUII) Pages
Contains information similar to that in the Appendices. FUII Pages are issued as part of the Procedure when a UL Standard is used in conjunction with the Procedure and are the same for all manufacturers within a particular category.
8. Section General (Sec. Gen.)
Contains description, requirements, identifications and/or specifications that are common to all products covered by the entire volume and supplements the information provided in the Description Section.
9. Description Section (Sec.)
Contains the specific description of one or more products or systems. This includes written text supplemented by photographs, drawings, etc., as necessary to define features that affect compliance with the applicable requirements.
● L类服务作者: 622 时间: 2011-10-12 19:29
对于L类服务，UL是通过标签来收取跟踪检验费用的。在工厂向UL申请购买标签时，标签的价格包含了两方面的费用：标签的成本和服务费（即UL的跟踪检验费用）。因此，UL现场代表在检验工厂时，UL不再向工厂收费，除非是大量的产品复验或是UL对工厂实施了特殊检验作者: 04211 时间: 2011-10-12 19:29
很详细很具体作者: fumsga 时间: 2011-10-12 19:29
so good and detailed...作者: fumsga 时间: 2011-10-12 19:29
But one thing I still need to remind everybody about the IPI, pls kindly remember:
Don't sheep out the products with the UL mark unless the IPI is finished and can fulfill UL's requirements....作者: q529891012 时间: 2011-10-12 19:29
对于电线、插头多少数量检验一次？