验货员论坛

标题: UL778中的绝缘材料厚度要求? [打印本页]

作者: jeffy123    时间: 2011-9-6 21:38
标题: UL778中的绝缘材料厚度要求?
17.3.3 An insulated lining or barrier of vulcanized fiber or similar material used where a spacing would
otherwise be less than the minimum shall not be less than 1/32 inch (0.8 mm) thick and shall be so located
or of such material that it will not be adversely affected by arcing.
Exception No. 1: Vulcanized fiber not less than 1/64 inch (0.4 mm) thick may be used in conjunction with
an air-spacing of not less than 50 percent of the minimum through-air spacing.
Exception No. 2: Insulating material thinner than that specified may be used if investigated and found to
be acceptable for the application.

UL778,17.3.3章节有提到绝缘材料厚度为0.8mm。是否相反极性间的绝缘材料厚度也按此要求,还是没有要求?

谢谢哦!
作者: MS168    时间: 2011-9-7 08:18
知道的回复一下。。。。。。。。。。




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2