标题: 最新toaster 结构要求 [打印本页] 作者: 622 时间: 2011-9-4 18:29 标题: 最新toaster 结构要求 根据IEC 60335-2-9:2008 22.113的最新要求, 需要将toaster外面的手柄按住后, 最长周期结束后吐司机全级断开 有哪些机构这么考核了?这个结构很难更改作者: 04211 时间: 2011-9-4 18:30
一直都是这样要求的吧。厂家最清楚这种结构的。作者: 622 时间: 2011-9-4 18:30
怎么改的?据我所知好像很难改的作者: 04211 时间: 2011-9-4 18:30
19.102 Toasters, loaded with the bread specified for normal operation, are operated at
rated power input. The ejector mechanism is prevented from releasing and the supply is
maintained to the toaster after the timer has completed its maximum cycle.
22.113 Toasters having an ejector mechanism shall be constructed so that they switch off
automatically after the normal toasting time even if the ejector mechanism is blocked.
Compliance is checked by the following test.
The toaster is supplied at rated voltage and the ejector mechanism is prevented from
releasing. On the completion of the normal toasting time, heating elements shall be
automatically disconnected from the supply by at least an all-pole disconnection, microdisconnection.
However, a single pole, micro-disconnection is allowed, provided heating
elements are not accessible to the test probe 12 of IEC 61032