验货员论坛

标题: TJX DROP TEST [打印本页]

作者: kimiearth 时间: 2011-8-31 09:40
标题: TJX DROP TEST
跟大家分享一下。A. ISTA-1A modified for TJX
This procedure covers testing of ALL individual packaged-products. It needs to be tested at inner level if store ready packed, if not, then at master carton level.

The drop test consists of a ‘10 free fall drop sequence test’ from heights that vary with weight as follows:

Imperial System[size=10.0000pt]			[size=10.0000pt]	Metric System[size=10.0000pt]
Packaged-Product Weight[size=10.0000pt]		Drop Height[size=10.0000pt]	[size=10.0000pt]	Packaged-Product Weight[size=10.0000pt]		Drop Height[size=10.0000pt]
Equal or greater than[size=10.0000pt]	But Less Than[size=10.0000pt]	Free Fall[size=10.0000pt]	[size=10.0000pt]	Equal or greater than[size=10.0000pt]	But Less Than[size=10.0000pt]	Free Fall[size=10.0000pt]
lb[size=10.0000pt]	lb[size=10.0000pt]	in.[size=10.0000pt]	[size=10.0000pt]	kg[size=10.0000pt]	kg[size=10.0000pt]	cm[size=10.0000pt]
[size=10.0000pt]0[size=10.0000pt]	61[size=10.0000pt]	18[size=10.0000pt]	[size=10.0000pt]	[size=10.0000pt]0[size=10.0000pt]	28[size=10.0000pt]	46[size=10.0000pt]
61[size=10.0000pt]	100[size=10.0000pt]	12[size=10.0000pt]	[size=10.0000pt]	28[size=10.0000pt]	45[size=10.0000pt]	31[size=10.0000pt]
100[size=10.0000pt]	[size=10.0000pt]-[size=10.0000pt]	[size=10.0000pt]8[size=10.0000pt]	[size=10.0000pt]	45[size=10.0000pt]	[size=10.0000pt]-[size=10.0000pt]	20[size=10.0000pt]

file:///C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ksohtml\wps_clip_image-8885.png

The test must be performed in following order:
a. Most fragile corner, if not known, at the carton manufacturer's joint
b. Shortest edge radiating from that corner
c. Medium edge radiating from that corner
d. Longest edge radiating from that corner
e. Flat on one of the smallest faces
f. Flat on the opposite small face
g. Flat on one of the medium faces
h. Flat on the opposite medium face
i. Flat on one of the largest faces
j. Flat on the opposite largest face

作者: MS168 时间: 2011-8-31 10:15
谢谢分享。。。。。。。。

作者: VICTORLKY 时间: 2011-8-31 10:39
谢谢分享。。。

作者: lonely0 时间: 2011-8-31 10:44
谢谢分享。。。

作者: lalabadboy 时间: 2011-8-31 11:37
摔箱测试。

作者: zwei1986 时间: 2011-9-4 21:44
很多家都在做TJX啊

欢迎光临验货员论坛 (http://bbs.wtoqc.net/)