验货员论坛

标题: Temperature shock test chamber [打印本页]

---

作者: yanwuxiang    时间: 2011-7-1 14:39
标题: Temperature shock test chamber

	Purpose
	This product is applicable for the safe performance test of electronic components and parts and provides the reliable test and product selection test etc; through the chamber test,(linpin) the product reliability can be improved and the quality control can be conducted.
	Chamber Structure
	All functions adopt the computer control with good operation interface so as to ensure the user’s operation and monitoring is more simple and straightforward(linpin). The cold chamber and hot chamber are controlled independently and the chamber doors are independent of each other so as to enlarge the use range of the test chamber (1 chamber for 3 purposes)(linpin). A standard lead hole pipe is installed on the top of the chamber in order to facilitate users to lead sensor cable,(linpin) inspection cable etc into the chamber.
	Control System
	The switching time between low temperature zone and high temperature zone is not more than 15sec. The temperature recovery time is not more than 5min.
	Standards Applied
	GB/T2423.1.2, GB10592-89, GJB150
	Specs & Technical Parameters
	Model (CM) WDCJ-162 WDCJ-340 WDCJ-500 WDCJ-010 Workroom Dimensions 45*45*45 60*60*60 80*80*80 100*100*100 Exterior Dimensions 156*87*154.5 171*102*184.5 191*122*226.5 211*142*266.5 Sample Zone Dimensions 30*30*25 45*45*36 65*65*50 85*85*70 Power 6.5(KW) 8.6(KW) 13.5(KW) 15.5KW Performance Index Temperature Range A:-20℃~200℃ B:-40℃~200℃ C:-60℃~200℃ Temperature Fluctuation ≤±2℃ for high temperature and low temperature Temperature Fluctuation ≤±0.5℃(Under constant temperauture) Sample Zone Load 20kg 30kg 50kg 60kg

---

作者: FSGFISH    时间: 2011-7-1 15:28
真心想分享的话，就发个中文版的，你当人人都是专家啊

---

欢迎光临 验货员论坛 (http://bbs.wtoqc.net/)

Powered by Discuz! X3.2