标题: 公证行的面试题，大家来试试吧，呵呵 [打印本页] 作者: jamesh 时间: 2010-3-10 17:43 标题: 公证行的面试题，大家来试试吧，呵呵 1.The update standard No. for safety of toys is:_________.
2.For plush toys, on-site tests normally include:________._______.______._______.
3.Inflatable toys should normally bear____________.
4.Please example 3 type of hardness_________._________.__________.
5.The height of "CE" marking should be higher than:__________.
6.The dimensions of small parts cylinder:___________.
7.For the polybag with an opening perimeter greater than 380mm but without punched holes,
the min. thickness of polybag for toys product is:_________.
8.For hang tools, the moisture content of wood handle shall be:___________.
9.For 18/10 chrome no stainless steel, it has_________attraction.("strong"or"slight"or"no")作者: gaoguohua82 时间: 2010-3-10 18:06
不敢去了，虽然大多数英文都认识，可不知怎么填作者: 水金 时间: 2010-3-10 19:56
我来试试。
1 N71
2 visual instuffing check Torque - pull Test Metal Detector Test
3
4
5 5mm
6 1.25inch
7 0.038mm
8 10%
9 no作者: 水金 时间: 2010-3-10 19:57
请知道的牛人指教。作者: Tonylu 时间: 2010-3-10 20:21
自己做了下，9个有3个一下写不出来。。作者: 51355821 时间: 2010-3-10 21:58
1 EN71
3, 2Bar
4，HRA、HRB、HRC
