标题: staking streusth test 要求 [打印本页] 作者: sheng09 时间: 2009-2-27 15:31 标题: staking streusth test 要求 请问各位,谁有stacking streusth test 的测试方法和要求?作者: szsam 时间: 2009-3-2 18:33
Procedure（程序）
This test is suitable for 20 feet and 40 feet and HQ container.
这个测试适用于20英尺和四十英尺及HQ货柜。
Three shipping unit should be used, The loading need applied to 3 different face of the shipping unit by different stacking load, which is perpendicular the edge of L,W,H. The loading is defined below
用不同堆压负载，压着垂直于长，宽，高的三个不同的箱面。
这个负载有以下定义：
Loading = Weight of one shipping unit X No. of layer within 240cm X 2 (Safety factor) x 2 hours
负载重量=箱个体的重量×在240cm以内可堆的层数×2（安全系数）×2小时
e.g. Weight of one shipping unit = 5kg
No. of layer, L= 240cm/50cm= 4.8 = 4 layer
No. of layer, W=240cm/25cm=9.6 = 9 layer
No. of layer, H=240cm/35cm=6.9 = 6 layer
Hence, Applied Load, L = 5kg x 4 layer x 2 = 40kgf
Applied Load, W=5kg x 9 layer x 2 = 90kgf
Applied Load, H=5kg x 6 layer x 2 = 60kgf
因此，应加载，长 =5kg×4层×2=40kgf
应加载，宽=5kg×9层×2=90kgf
应加载，高 =5kg×6层×2=60kgf
高=35cm
宽=25cm
长=50cm
3. Checking and Record(核查和记录)
Cannot be accepted, any visual or functional damage to the package
不能接受，任何可视的或功能的损坏在包装上。
Cannot be accepted, any visual or audible occurrence of the product breaking
不能接受，任何看得见或听得见的产品损坏的发生。作者: inspector 时间: 2009-3-2 18:42
高，楼上正解