标题: 兼职:mould inspection [打印本页] 作者: hustlpi 时间: 2009-1-5 09:28 标题: 兼职:mould inspection Injection mould inspection summary:
1. Mould statement inspection.
Fixture
Cavity&core side inspection
Cooling system check(leakage? )
Injection form confirm
Slider
Flange
Mould key parts material and hardness comfirm
Coolant ducts check(1/4? 1/8? Or others)
Marking check (mould No., products' name&Rev., cavity No. For tracing? )
Pins
And so on.
2. Mould shot test inspection
The mould should be adjusted to a good statement: The most products moulding OK, and no critical defects was found.
Injection machine status and parameters confirm
Products confirm(appearance and dimension)
Mould shot statement confirm (connection, cooling system, injection system...)
email:sony.zhan@163.com
mobie:13824343326作者: hustlpi 时间: 2009-1-5 17:44
本人在深圳,可接受珠三角范围的检验业务,有意CALL我.作者: dybbbb2006 时间: 2009-1-5 17:52
我在广东,如果有检验订单也可以联系我.作者: davidcheung2008 时间: 2009-1-5 18:43
兄弟有需要请联系啊，13723559293作者: VisInspection 时间: 2009-1-5 21:44
Where is location of manufacturer and your price per man day??作者: stm442 时间: 2009-1-7 16:27
各位兄弟,
这个好象是找工作的??作者: tamelesswolf 时间: 2009-1-8 12:13
本人在东莞 ，如有需要的话可以联系本人，谢谢作者: chrisouyang 时间: 2009-1-9 21:43
是找工作的！