其他 | |
冷料痕 | cold slug |
臟污 | defect spot |
低扭力 | low torque |
壓力線 | stress line |
色差 | color deviation |
結合不良(破洞) | poor welding |
油污 | oil mark |
汽泡 | steam suds |
Mylar歪斜 | Mylar skew |
整修不良 | trmming NG |
銀線 | silver spray |
射出不良 | poor injection |
原材不良 | poor raw material |
T/P按鍵過低 | T/P button too low |
未導角 | no chamfer |
導角不良 | bad chamfer |
漲模 | parting line with flash |
頂凸白 | knockout pin |
鑽頭 | driller |
黏模 | stick on tool |
銑床 | gate flash trimming NG |
進料點未修平(灌點整修不良) | gate flash |
重量不符 | poor weight |
尺寸太小 | poor Dim. |
作廢 | scrap |
包覆不良 | gas trap |
外觀不良 | poor appearance |
灌料點沒洗 | gate flash no cut off |
超音波結合不良 | poor sonic welding |
包風 | gas mark burn |
卡鍵 | knob to lock |
黑線 | black line |
| 欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) | Powered by Discuz! X3.2 |