验货员论坛

标题: package-drop test [打印本页]

作者: nowcke 时间: 2008-8-26 10:22
标题: package-drop test

Package Drop Test

• Number of samples required: One sample is required for the tests in this procedure.
The test drop height varies with the weight of the packaged-product. Find the weight of the packaged-product in the following chart to determine a drop height:

Packaged-Product Weight				Drop Height
Equal to or greater than		But Less than		Free Fall
lb	kg	lb	kg	In.	cm
0	0	21	10	30	76
21	10	41	19	24	61
41	19	61	28	18	46
61	28	100	45	12	31
100	45	150	68	8	20

The test method requires the packaged-product to be dropped in several different package orientations.

Sequence #	Orientation	Specific face, edge or corner
1	Corner	Any one of the eight corners
2	Edge	shortest edge radiating from the corner tested
3	Edge	next longest edge radiating from the corner tested
4	Edge	longest edge radiating from the corner tested
5	Face	one of the smallest faces
6	Face	opposite small face
7	Face	one of the medium faces
8	Face	opposite medium face
9	Face	one of the largest faces
10	Face	opposite large face

The packaged-product has satisfactorily passed the test if, upon examination, no more than 2% of the product is damaged.

作者: 无痕 时间: 2008-8-26 10:49
谢谢共享,不过每个公司或客人的要求都不太一样,我们公司的要求是25KG以下60CM一角六面,25KG以上45CM一角六面

作者: hnsxpx555 时间: 2008-8-26 12:27
我们要求是六面三边一角的。

作者: garygan 时间: 2008-8-26 13:51
但通常都不会从角开始的，因为伤害太大。

作者: wangyin 时间: 2008-8-26 14:57
不过建议还是从角开始.要知道,很多装卸工人到最后没体力了,摔箱起来厉害哦.呵呵

作者: kevin_6888 时间: 2008-8-26 21:48
i like english version of information,as i can learn a lot from it

作者: passolo 时间: 2008-8-27 23:48
跌落根据不同的产品有不同的方式

作者: superM3 时间: 2008-9-12 09:02
也是target的最新标准哦！厉害

作者: 唐年生 时间: 2008-12-5 15:41
标题: 纸箱跌落测试
我公司跌落测试是连纸箱(卡通箱)跌1角3边6面,一般的玩具公司都是执行此标准.

作者: 墨羽逸林 时间: 2008-12-6 09:13
摔箱我们公司从来没做过，只做过空箱子的抗压

作者: joe-ac 时间: 2008-12-9 10:02
每個客人的要求都不同, 你們對於陶瓷和玻璃也要求DROP TEST

作者: lenshui 时间: 2009-4-1 22:12
thanks for your documents

欢迎光临验货员论坛 (http://bbs.wtoqc.net/)