标题: Inspection of Baby Jogger [打印本页] 作者: brucecheung 时间: 2008-5-28 15:41 标题: Inspection of Baby Jogger Inspection of Baby Jogger2. INSPECTION CRITERIA
Packaging, marking, labeling, illustration and instruction.- d' S( F" b Q) T4 y0 q
2.1.1 All the packaging material should be new, not damaged nor soaked.6 x5 |" P2 R$ N% d2 F: R( q9 s
2.1.2 The packaging material can protect the goods from damage during
Transportation. (ISTA test)
2.1.3 The shipping mark, label (such as price label), hangtag. etc should conform to client’s spec and/or approved samples.
The printing and colour must conform to client’s specification [3 Z) p9 {& o+ k2 F% N* Y' e- U
and/ or approved sample and in good quality." B2 Y2 W: m* |% H
, n' t3 ~2 c$ Y9 q4 N0 X) r) |
The relevant legal marking and warning must be presented legibly and correctly on the individual packaging and/or product according to the regulation of the importer’s country such as country of origin …etc.* f, q) e: Z9 r5 V+ R. O
! N7 Z: e4 ? o( \/ ?& E) U u& j
2.1.5 Text of illustration, instruction and warning must be in user’s language. (in English for USA user)* g7 ]( p w& v) H, x, ]- b8 t
2.1.6 The illustration and instruction on the packaging must conform to the product and its actual performance.
2.1.7 The barcode on the packaging and product must be correct and scannable.
2.1.8 Stickers should be applied straight and no air pockets under stickers.; x5 l0 e6 ?7 A l# i; ?
2.2 Product& H* A& W2 v& w/ p$ T
2.2.1 Aesthetics / Workmanship check on Level ll( F E0 R; w+ l( J2 |+ J; I+ n
• Correct shape, size and colour9 r+ O: `) g1 c; X( o7 L/ L7 K( z* l" D! b
• Decoration such as painting, tempo, silkscreen printing, and electro - plating must be in good quality, correct color and located correctly.' \3 r/ V. j1 p; f8 W. R' [& J, z
• No sharp point and edge
• No rust or corrosion) h; w8 K1 q) a7 G9 j6 h- O* h; v6 S
• Moulding defect such as sink mark, flow line, white mark should be limited to minimum* s; A" P$ U2 n
• The screw, nail must be secured firmly. No loosen/ missing screws or nails.
• The parts must be assembled together firmly and correctly.; M! D! \$ x; v- g
• No dirt, stains or contamination
• Push handles should not be deformed, broken, cracked or flash, and can not move or rotate.& T/ p7 Z# V+ s7 u9 B
• Canopy and seat should be tightly fit with frame, operated easily and smoothly. Color and printing on fabric of canopy and seat should match with each other and conform to reference sample. Canopy and seat should be free of poor sewing, loose stitch, untrimmed long thread end, broken, open seam, and jump stitch.5 \! t- F' p* K F0 R# y
• No broken needles or metal slivers are in fabric.
• Seat must be held firmly in position.
• Strap should be correct width and length. And strip twists are unacceptable.0 @! [$ A$ r6 ?
• Buckle should be at correct position, and not reversed, cracked or broken.
• Color and size of all metal tubes should conform to reference sample.1 G2 N p4 T0 W2 v4 r V5 D
• All hard components should be free of scratches, dent marks, cracks, flash, sharp point, hard burr. Metal parts should be free of sharp edge.
• All wheels should not be slant assembled.& Q) X. O; x) E6 h4 N+ O* i0 O
0 G! S# E$ e( S; N/ M: i' D1 i: I) ^
2.2.2 Functional check
• Straight line moving test (Roll Test) conducted on1 out of every 15 units: the distance of 10 feet movement shall not be greater than 2 inch, or a distance of 20 feet shall not deviate over 4 inches.0 v: q# i- l+ V) o0 {7 {2 Q" p
• 100 lb. Load test conducted on 1 out of every 15 units.
• Check function of rotation locks of the wheel on all sample size., g( q& x1 l" i6 A
• Check the wheels assembly, too tight or loose is unacceptable.
• Buckle functional check for 3 times, too tight, loose is unacceptable, white mark is not allowed after the test.
• All tubes should be protected firmly with cap at ends. 7 T' D! l" V; \' f' l9 Y
• Pull Test of safety strap and attachments to ASTM standards 作者: brucecheung 时间: 2008-5-28 15:59
3. DEFECT CLASSIFICATION LIST
Note: Not limit to but only for your reference and according to above definition for standard reference
3.1 Master carton, product packaging (such as gift box, blister card.,polybag.etc)%
- Broken /torn Major
- Wet Major
- Creased / wrinkle Major/Minor
- Scratch/ abrasion Major/Minor
- With odor Major
- Poor sealing/ gluing Major
- Substandard packaging material, can’t protect the Major
- Over size or under size Major
- Incorrect colour / printing Major/Minor
- Poor printing (color shade, white spot, off register. Etc) Major
- Incorrect quantity or assortment of product Critical
- Polybag dimensions/thickness/ warning statement/Air Major
hole not conform to standard
3.2 Marking, Labeling, illustration and instruction.
-Incorrect / missed shipping mark Major
-Incorrect / missed price label/ hang tag...etc Major
-Misleading/ incorrect product description, illustration Critical
(including photo on the packing) instruction.:
-Missed / incorrect legal statement/ warning such Critical
as CE mark, country of origin. etc., according to the
relevant safety standard and other regulation
- Instruction sheet missed Major
- Illegible marking Major
- Marking/ label incorrect located Major4
- Missed/ incorrect/ unscannable / damaged barcode Major
3.3 Aesthetics, workmanship, function, safety and reliability
- Size / shape/ colour/ material not conform to Major
specification
- Sharp point, sharp edge Critical
- Rust /corrosion Major
- Intermittent function Critical
- No function Critical
- Function not as per illustration or instruction Major
- Missed / loosen screws Critical
- Printing off register Major
- Untrimmed flash / burr Critical
- Painting over-spray/ under-spray Major/Minor
- Label peel off Major/Minor
- Parts loosen or detached (not small part) Major
- Missing parts Major
- Crack, chip Major
- Broken Major
- Dirt /stain Major/Minor
- Molding defect: sink mark, white mark, flow line.etc Major/Minor
- Any stitching defect Major / Minor
- Loose push handle – can be moved or rotated Major
-- Canopy / seat loose Critical
- Canopy / seat can not or difficultly be assembled to frame Major
- Mis-match color of fabric Major
- Broken needle or similar metal parts in fabric Critical
- Strip twist Major
- Loose wheel Critical
- Wheel can not touch ground (gap over 1.5mm) Major
- No function or malfunction of rotation lock Critical
- No function or malfunction of buckle Critical
- Buckle broken, crack Critical作者: 星雨 时间: 2008-5-29 09:39
全英文的看的好辛苦，有中英文对照就好了作者: jxl116 时间: 2008-5-29 09:43
thanks for posting作者: ankyo200 时间: 2008-5-29 10:07
have a look!作者: cmatcl 时间: 2008-7-10 14:03 饮水思源，感谢大哥
饮水思源，感谢大哥