标题: factory refuse to rework ,what we do [打印本页] 作者: 火眼金靖 时间: 2008-5-28 11:22 标题: factory refuse to rework ,what we do what we should do ,you think it is the best way作者: jimmylin008 时间: 2008-5-28 12:48
把 单子转了吧呵呵！作者: Skarven 时间: 2008-5-28 17:12
这拒绝先看看原因,现在有些工厂是在挑客人了,不再是前几年的工厂.所以认为是工厂的原因还是怎样再来对症下药吧!作者: garygan 时间: 2008-8-11 18:00
Then----Reject!作者: wtoqcer 时间: 2008-8-14 21:20
if you think you as a nasty qc can instruct the factory to rework based on your judgement on the quality, think it again作者: DAVID3397 时间: 2008-8-14 23:00
如果你是QC INSPECTOR,打电话回公司请示领导..作者: buyer_126 时间: 2008-8-17 19:40
If this matter happens to me,my way is just feedback truly to salemen by report,other things leave to them.作者: neverust 时间: 2008-8-18 01:08
reject again and again作者: boling_5200 时间: 2008-8-18 21:37
first you must know why the factory refused to rework?then,talk to your conpany and tell them what happened.also,you may talk to the factory,if the factory still refuse,you had better leave the factory quickly,if not ,nobody know what would happen!作者: qingshui88 时间: 2008-8-29 19:58
feedback to your company!作者: field.zhang 时间: 2008-11-19 20:38
In my opinion, we should know the information as below:
1. how critical the problem is? if it happen before and got complains fom the market, just reject, you have no chose.
2. what is the quantity? if it over the acceptable level according the request such as AQL, you can reject because it will be high risk in future market.
3. what is deadline about the products shipping date, if it had enough time to rework, reject it.
Do afraid them, reject it and ensure the quality goods is your responsibility.作者: 2008weaverwin 时间: 2009-11-16 17:12
deal with the problem need many communicate skills and use them freely .