呵呵说笑了,我记不清了,好象是
12345679X0.72%/8+1-1作者: 爱上验货 时间: 2008-5-3 14:14
哈哈
这个问题公式突然间被你一问忘记了作者: DAVIDLEUNG 时间: 2008-5-3 19:20
怎么没人能告知???作者: DAVIDLEUNG 时间: 2008-5-4 10:41
明天就出差拉
有没有人帮我啊?作者: tungyung 时间: 2008-5-4 12:30 标题: 回复 #1 DAVIDLEUNG 的帖子 8+9=0.888888888888……………
12345679×0.72=8888888.88
一般的我只试着两个功能.
欢迎大家补充,指正!作者: DAVIDLEUNG 时间: 2008-5-4 13:21
谢谢!作者: ntbaby 时间: 2008-5-4 15:34
Functional check
- Requirement
A Turn on the unit then tapping the unit by hand.
B Check full segment on lens, normally press buttons as below:
123456789*0.072=
The result should be: “8888888 808” (for unit with 12 digitals indication)
C Functional check for each button according to instruction sheet. If no instruction sheet
included, normally functional check for buttons as below:
1.2+3=5
2.3-4=-1
3.6÷5=1.2*7=8.4
4.100√=10
5. 9÷0"0 error"
D After functional check, waiting for the unit power off automatically.作者: DAVIDLEUNG 时间: 2008-5-4 17:06
TKS!!!!!!作者: ntbaby 时间: 2008-5-4 19:07 作者: jxsheng5 时间: 2008-5-4 21:28
不同的型號具體的檢驗方法不同,作者: xujianyou 时间: 2008-5-4 22:11
原来有这样的细节,不说还不知道作者: leebol 时间: 2008-5-5 09:31
very useful作者: ankyo200 时间: 2008-5-5 13:58
thanks ,it's very good!作者: tungyung 时间: 2008-5-5 14:19 占个位置现!!!作者: 浪激石 时间: 2008-5-5 15:02 以卡西欧为行业标准作者: woman 时间: 2008-5-11 00:29 标题: 建议LZ去教工厂给你复印几份 大家说的都是最简单的计算器公式.功能多的计算器有好多公司.工厂大把的文件.作者: 星星 时间: 2008-10-25 11:44
支持一下。。。。。。。。。。。。作者: qingshui88 时间: 2008-12-7 20:44
8位数的计算器检验公式
ON 12345679x0.072 +3 -3 /8= √ % M+ M- M- MR MC /0= CE OFF