标题: 招聘COC auditor & production engineer [打印本页] 作者: 好好2001 时间: 2016-5-13 11:45 标题: 招聘COC auditor & production engineer 现受一家公司的委托招聘审核员和生产工程师，具体条件如下：
Social Compliance Auditor
Job Summary:
• Manage the Compliance management audit team to facilitate & monitor the supplier in COC compliance and also drive suppliers for continuous improvement.
Job Relationships
• Internal: Compliance Management team, Supply Chain Sourcing and Strategies, Toy BU, Seating & Décor BU, QA, Overseas Offices
• External: Supply base, NGO, audit firms
Job Responsibilities
● New supplier COC development and qualification including supplier training, policies & procedures review and new supplier evaluation audit…etc.
● Initiate training program to suppliers & organize serial of trainings/workshops to provide suppliers technical & practical knowledge in COC compliance.
● Manage supplier COC patrol audits including prepare & maintain annual audit plan, perform audits & CAP follow up and evaluate audit effectiveness & efficiency to ensure close monitoring of suppliers.
● Manage customer COC audits including review supplier’s audit report, assist supplier to formulate the CAP and CAP follow up & verification.
● Conduct on-site inspection and provide technical advice on improving factory’s facilities, processes and working environment to demonstrate compliance in both COC.
● Issue audit reports & Corrective Action Request, facilitate suppliers to formulate the effective corrective and preventive action plans.
● Update COC requirements, applicable laws & regulations and industrial practice to teammates & suppliers through ITS, local government etc.
● Conduct survey on COC trends of other brands/industries, benchmark good practices for continuous improvement.
● Follow up the implementation of the suppliers’ improvement plans and verify the effectiveness of the improvement actions.
● Maintain grievance channel between factories’ employees, investigate and follow up suggestion letters.
● Reach out to NGOs/other associations for collaborative ideas, best practice sharing and bench marking.
● Take up ad hoc projects assigned by supervisor
Qualifications/Experience
● Have sound knowledge of social responsibility
● Have at least 3-year experience in running social responsibility improvement projects
● Have a sound knowledge & at least 3-year experience in supplier audit, i.e. SA8000 and social compliance.
● Qualified Lead Auditor in management system, i.e. SA8000
● Strong business ethics and high level of integrity
Education
Bachelor Degree holder in engineering / manufacturing.
Job Knowledge/Skills
● Strong organization skills.
● Results oriented.
● Good interpersonal skills and a demonstrated ability to deal with different levels of people
● Ability to drive process improvement and efficiency throughout complex organizations
● Strong communication and presentation skills with high proficiency in both written and spoken English, Cantonese and Mandarin.
Other Requirements
• Willing to travel
Production Engineer
Job Summary:
To actively work with Tool manufacturers, Vendors, Factories to ensure that tools and manufacturing processes are suitable to make product of the correct quality and safety.
To actively work with factories to ensure that they are capable and meet all TMS quality and product safety requirements.
Job Relationships
Internal – Quality & Safety Teams/ Product Development, Operations.
Associated Business Units – HM Toys, Non HM, Non McD’s& Retail Toys, other TMS Business.
External – Manufacturing Vendors, Suppliers, Testing Labs, Subcontract Manufacturers, Raw Material Suppliers.
Direct Report – None
Job Responsibilities
• Manage the oversight of the tool manufacturing process.
• Monitor, advise and report back on tool fabrication if /when issues arise.
• Evaluate first shot and assembly test shots, testing as necessary.
• Ensure that SAS samples meet the specification requirements and their submission to development engineers for approval.
• Organise and participate in mould revision meetings with factories /tool makersand be responsible for sign off approval.
• Communicate and review any changes to functionality or aesthetics with the development engineers and quality engineers.
• Monitor production starts up, including review of first offmoulded components.
• Follow up on all issues found with factories, tool makers and TMS functions ‘debugging’ as necessary.
• Active involvement in factory assessment, selection, control and improvement.
• Conduct necessary activities both pre and during production in order to identify production quality issues early in the product life cycle, & monitoring & verifying factory solutions.
• Work with factories, and suppliers, to improve the TMS factory base and product execution in order to consistently meet quality expectations and get thing right first time.
• Provide technical advice and support to TMS and factory management.
• Work with factories to carry out necessary product improvements to meet TMS requirements.
• Focused working with factories on complex key item programs, to ensure equipment, skill levels, production planning and capacity meet all TMS requirements needs prior to production.
• Facilitate problem resolution in factories monitortheir effectiveness and advise on corrective actions as necessary.
Qualifications/Experience
• Technical expertise in toys, premium & children’s products.
• Proven experience working in factories in production.
• Good basic knowledge in a variety of other product areas.
Education
• At least 4 years working in tooling and factories
• Degreein manufacturing engineering or relevant scientific/technical discipline.
Job Knowledge/Skills
• Problem solving ability.
• Knowledge of tooling and manufacturing processes, procedures and best practice.
• Good communication and persuasive skills.
• Good spoken and written English, Mandarin / Vietnamese (as appropriate)
Other Requirements
• High integrity and business ethics.
• Team Player
• Able and willing to travel as required.
Basic information
Are you trying to find honest and professional QC inspector in Guangdong to help you check the product quality for your company? I am Louis .I will help you perform inspection, loading inspection or factory audit. I live in Guangzhou Guangdong China, I have more than 15 years inspection, testing and factory audit experience. I can offer comprehensive Chinese or English report to you. If you need my help, pls contact me. The price is reasonable & the service is added.
Product Expertise
Offering quality control services and Inspections on all products and imports, including: Textiles and Bags, Gifts and Premiums, Garment and Apparel, Toys and Juvenile Products, Electronic and other Electrical Devices, Houseware products, Lighting, Sundries and Stationery, Tools and DIY, Printing and Packaging, Industrial and Home Appliances.
Product Inspections
Save money and avoid costly defects by ensuring your product imports meet your specifications and quality standards.
Audit Programs
Protect your brand and company. Ensure your factories adhere to local and international labor laws and working conditions. Audit type：QMS、SA、FCCA、ETI、BSCI etc.
Pre-production Inspection (PPI)
A visual check on the quality of components, materials and accessories at the beginning of
productionagainst clients' specifications and/or reference sample.The PPI thus permits timely
corrections and improvements before the mass production is initiated; any non-conformity is immediately reported so as to avoid delay in shipment.
During Production Inspection (DPI)
A visual check on the quality of components, materials, semi-finished and finished products when at least 20% - 30% of the order has been completed.Randomly inspects the Production batch and those products in the line for possible defects. If any should occur, identifies the deviation and
provides advice on the corrective measures that are necessary to ensure a uniform batch quality and a quality product. This service allows you to find out the problems at the early stage instead of at the last minute.
Pre-shipment Inspection (PSI)
The pre-shipment inspection takes place when the merchandise is 100% completed, packed, marked and ready for shipment. I randomly draw some product from finished goods, based on statistical random sampling technique, commonly known as ANSI/ASQC Z1.4, MIL-STD-105E, BS6001,
DIN40080, ISO2859 or NFX06-022, to verify that thefinished products meet with your requirement.
Loading Supervision
I will reach factories, warehouse, loading place to check product information, quantiy and package before loading; supervise the whole loading process and help manufacturer finish loading under correct and clear working clauses and working process.
Contact: Louis QQ：723699348 E-mail:louiszhau@163.com作者: yczj0723 时间: 2016-5-25 19:46
