验货员论坛

标题: 求铅笔验货标准急注意事项 [打印本页]

作者: BENCHEN915    时间: 2012-12-29 19:49
标题: 求铅笔验货标准急注意事项
各位,公司有铅笔要验货,求铅笔验货标准急注意事项,谢谢!
作者: Antony.Lee    时间: 2012-12-30 10:38
支持的说
作者: 水的质量    时间: 2012-12-30 12:44
文具类
作者: succesjw    时间: 2012-12-30 14:23
帮顶
作者: lijianzh2012    时间: 2012-12-30 14:31
表示关注
作者: d601022246    时间: 2012-12-30 17:33
称重量,测尺寸。
作者: sn823    时间: 2012-12-31 10:41
How about chemistry testing?
作者: michael_yy    时间: 2012-12-31 20:31
随便看看了,化学测试,验货的时候有你做不了,知道有屁用啊?!
不外乎看看外观,试试功能,要注意几点:
1.偏心-用卷笔刀削铅笔容易断锌
2.滑芯-不用说了,影响功能
3.胶合质量-不能开裂
4.外表油漆或者印刷质量
5.书写功能,用橡皮能够很好的搽除
6.注意铅笔铅芯的硬度要求,如HB,2B,4B等等,不过一般的工厂都没有测试设备,只好和样品比较了。
以下供你参考一下
1. Pencils
wooden, graphite and coloured  
All Pencils - General Requirements
        Wood products must come from a certified sustainable source, detail or certification to be demonstrated at product selection and recorded in the specification on INSPIRE
        HB lead to be used unless otherwise specified in product brief
        Pencil lead to have a high breaking strength
        Coloured pencils to have a good depth of colour and be dust free
        Coloured pencils not to stain hands etc
        Must be able to sharpen well with no splinters or rough surfaces
        Graphite consistency adequate to provide smooth powder free writing
        All pencils (including natural looking) to be coated to 9H hardness
        If erasers provided, follow eraser brand standard (reference below)
Sainsbury's Basics
        Simple pencil should be presented with no eraser, undecorated but 9H hardness coated and not sharpened

2. Mechanical pencils
General Requirements
        Any erasers included with pencil to follow eraser brand standard (reference below)
        Minimum of 2 refills included in barrel, or pack of refills accompanying pencil

3. Erasers and pencil grips
General Requirements
        Erasers should leave no trace of graphite after use on all types of paper with HB pencils
        Coloured erasers should not leave colour on paper after use
        Erasers should leave little dust as possible after use
        Pencil grips should fit standard pencils with no slip
        Pencil grips should be easy to apply
        Coloured pencil grips should not leave colour trace on skin or paper, and must be free from phthalates

4.Pencil sharpeners
General Requirements
        Blades to be sharp and sharpen pencil easily and smoothly
        If waste compartment is provided, to be easily accessible for emptying
        Blade to be recessed and not accessible
作者: WHG168    时间: 2013-1-1 10:24
不外乎看看外观,试试功能,要注意几点:
1.偏心-用卷笔刀削铅笔容易断锌
2.滑芯-不用说了,影响功能
3.胶合质量-不能开裂
4.外表油漆或者印刷质量
5.书写功能,用橡皮能够很好的搽除
6.注意铅笔铅芯的硬度要求,如HB,2B,4B等等,不过一般的工厂都没有测试设备,只好和样品比较了。

作者: andyli466    时间: 2013-8-16 21:26
不错,好好学习了

作者: andyli466    时间: 2013-8-16 21:26
不错,好好学习了

作者: husteed    时间: 2015-1-6 15:38
Very good and specific, thanks
作者: zoukunhymax    时间: 2015-3-24 09:46
好东西,学习了
作者: mangorgor    时间: 2015-5-5 14:11
挺好!谢谢分享!
作者: Kem.周    时间: 2015-8-6 17:24
学习

作者: xxk5179    时间: 2015-9-11 10:22
好东西,谢谢楼主分享!
作者: tree2688    时间: 2015-10-12 13:48
不错
作者: SANTOUDNL    时间: 2016-1-16 14:46
谢谢楼主分享




欢迎光临 验货员论坛 (http://bbs.wtoqc.net/) Powered by Discuz! X3.2